Roberts Engineering 4wd Off Road Snatch Block

Roberts Engieering 4wd Offroad Snatch block, designed and manufactured here in Bromley Christchurch by Roberts Engineering and C&R Equipment. 11mm Max wire rope diamter, 13mm max for fibre and polyester ropes. Max 8,000kg pull with a min 12,000kg breaking load. Side plates rotate to allow entry of rope, large 55mm hole for large shackles and rigging. specially designed and bolted half moon retainers to stop side plates disconneting from bearing shaft which is common on cheaply made snatch blocks which only use circlips as a retainer and blow apart when you need the gear to perform at its best. Grease nipple added for greasing and maintanance. Designed for most 4wd applications and for use with all Docma winches to double line pull and double your rated pulling capacity plus pull awkward loads at different angles.

If you are stuck in your 4wd on the top of Waikaia Bush Road or pulling you and your mates team of V8 jetboats through the Hollyford then you will need this vital piece of equipment.