Christie Petrol Powered Post Driver CHPD107

The Christie Post Driver was developed by Christie Engineering to suit the harsh Australasian environment. Weighing 17.5kg for the CHPD107, it's lightweight and portable but still able to drive posts as swiftly as much larger and heavier hydraulic and pneumatic tools.

Drive wooden posts up to 105mm diameter using a prebored augered hole (ground conditions will affect performance).

The Christie Post Driver CHPD107 runs the 2hp GX50 motor and the driver runs a larger bore piston. All outer housings are new and different to the 52/78 and the fan cover is different to suit the GX50 motor and new guard, the main body and bottom handlebar housings now run 6 body bolts instead of 4.

It has a larger guide that is screwed on by a rope thread and secured by two SHCS so it wont spin. The reducers use a bayonet locking style with locating screws at the top of the reducer that lock into an aluminium locking plate that has concentric key slot holes in it. It uses the 40mm bottom hammer and Pipe cap anvils for Nb pipe sizes from 50-90.

Designed to drive single Y posts, T irons, Waratah Max Y posts, Waratah 90mm NB steel pipe end stay assemblies. Will drive up to 105mm diameter wooden posts using a prebored augered hole (ground conditions will affect performance).